By Michele Lerner
When you watch a home renovation show on TV, every project looks easy. Knocking down walls may look like the most fun, but that can be one of the more dangerous projects to take on if you don’t know what you’re doing.
What about replacing your floors? It seems like that could be a relatively simple process with a big result. We sought advice from Chuck Khiel, senior vice president of Fred Home Improvement in Bethesda, Md.; and Annie Elliott, owner of Annie Elliott Design in Washington, D.C. Responses via email were edited.
Q: What are the biggest mistakes homeowners make when trying to DIY a new floor?
Khiel: Not thinking the project all the way through. They either do not have the right tools or the knowledge to complete the task. Or something occurs with the floor that they did not factor in.
Q: Which flooring types are easiest to work with? Which are best to avoid for a DIY?
Khiel: The luxury vinyl snap lock or click locking floors are fairly easy to install. Tile floors are the best to avoid. Too many things can go wrong.
Q: Does the flooring type depend on the room? What else goes into choosing the right flooring to DIY?
Khiel: Flooring types can be dependent on what the room might be used for, but the size of the room does not matter. Certainly, things like maintenance should come into play when considering use of the room. Another factor is durability. Some floors just hold up better to pet claws and kids’ toys than others.
Elliott: Offices need tight, flatweave rugs or carpeting so chairs can roll over them easily. Wall-to-wall carpeting is terrific, but it’s a commitment. Carpet tiles are a fantastic alternative. They’re not inexpensive, but you can install them yourself, they don’t damage the floor and you can replace individual tiles if one gets stained.
I installed “Fedora” FLOR tiles in my office by myself, and I love them. The office was already furnished, so my method was to move furniture out of one corner and start laying tiles there, then once I had a few rows down, I’d move furniture onto that part and keep going. The great thing about carpet tiles is that you can install them almost wall-to-wall without a lot of trimming. I laid the floor tiles straight, starting approximately 1 inch from the wall, but since the walls are crooked, sometimes 1 inch of floor is revealed, sometimes a half-inch, sometimes 2 inches, but it looks terrific — very intentional — and I didn’t have to cut each tile to fit snugly against the wall.
Some people are hesitant to install hardwood floors in kitchens. Don’t be! First, if the rest of the house has hardwood floors, continuing them into the kitchen provides nice continuity. Second, a medium stain doesn’t show crumbs and spills — you’ll clean up eventually, but your kitchen won’t look horrible until then. (Dirt practically glows on white or light floors, and dark floors show every speck of dust.) And third, a glass or plate will have a fighting chance of survival if you drop it on a wood floor.
Q: What tools do you need to install new flooring?
Khiel: The type of tools needed depends directly on the type of flooring being installed. Luxury vinyl floors may just need a razor knife and a tape measure. Tile floors may need a wet saw, grinder and trowels. You may need several different types of saws to install wood floors.
Q: How do you make sure you measure correctly?
Khiel: Typically, you would measure the length times the width to get the square footage, then add 10. Tile, depending on the pattern, might require adding 20 percent (for diagonal patterns).
Q: Any other tips to upgrade your flooring?
Khiel: I know you can learn many things on YouTube, but some floor installations simply require someone of a certain skill set for the project to go smoothly.
Lerner is a freelance writer. This article first appeared in The Washington Post.